Views: 5836

BACTERICIDE FOR TANNING PROCESS

Product code : 1489985273

IPEL BT 802 is a wide spectrum microbicide based on a combination of isothiazolinones specially developed for the microbiological control at the desalting step of the tanning process. The lack of biocides allow fast microbiological growth that generates skin decomposition, bad smell damaging the skins permanently. Several species can cause this damage such as: Bacillus, Eschericihcia, Mikrococcus, Proteus e Pseduomonas. IPEL BT 802 active ingredients ensures fast and effective protection against bacteria and yeats in the wet state avoiding degradation and keeping the leather integrity for the tanning. IPEL BT 802 has low toxicity, good degradability, low odor and good compatibility with other chemicals used in the process that makes an interesting choice to treat this systems.

Introduction
Comments

SPECIFICATIONS

APLICATIONS

TOXICITY

MICROBIOLOGICAL ACTIVITY

Appearance:   Transparent liquid Specific gravity @ 20oC:   1,00 – 1,10
pH (Sol. 10% H2O dist.):   3,00 – 5,5
Solubility   Soluble in water, glycols and alcohols

The correct application of the IPEL BT 802 depends on the duration of the desalting process and of the auxiliaries used. For more detailed information, please contact our technical staff. Its recommended dosage level ranges from 0,1 to 0,3 % based on the dry weigh of the hides being processed.

According to Toxicological evaluations made by independent laboratories:
LD 50 Oral (rats, male): 3500 mg/kg LD 50 Dermal (rats, male): 3600 mg/kg Dermic irritant: Positive.

IPEL BT 802 is highly effective against microrganisms. Its wide spectrum includes:

Bacterias   Yests
Bacillus sp   Candida sp
Staphylococcus sp   Saccharomyces sp
Streptococcus sp   Rhodotorula sp Proteus sp
Pseudomonas sp Salmonella sp

    IPEL BT 802

HEALTH AND SAFETY

Keep the product in its original drum. Avoid direct sunlight. Store at room temperature bellow 50oC, protect from frost. The appropriate materials for contact with the product include stainless steel, PE, PPE and Teflon.
For more information on safety, please refer to product MSDS.

ENVIROMMENTAL INFORMATION

IPEL BT 802 active ingredients are biodegradable when diluted under the CIM (Minimum Inhibitory Concentration) and will not cause any damage when sent diluted to waste treatment plants. In case of spillage, proceed as indicated in the MSDS and discard accordingly to the local regulations

HANDLING AND STORAGE

Available in one-way HDPE drums of 20, 50 200 kg and in IBC containers of 1000 kg. Keep the product in its original package, protected from sunlight and store in temperature below 50oC. Suitable contact materials include stainless steel, PE, HDPE and teflon.

Tags: