PRODUCT INFORMATION
Appearance: Yellowish dispersion
pH (as is): 4,5 – 7,0
Specific gravity (20oC): 1,00 – 1,15
Stability: pH: Max 9,0 Light stable
Temperature: Max 100o C
APLICATION INFORMATION
IPEL FG 891 is normally used in dosages between 0.1% to 0.25% about the total skin weight. The application should be done after 15 to 30 minutes of acid addition in the tanning process. The product can be diluted in the proportion 1:3 and be slowly added in the drum. If it is necessary, part of this product ( 30% of the total ) can be added during the tanning process.
The Ipel Labs is equipped to offer technical assistance to our customer to determine the adequate use levels.
Ours laboratories are equipped to offer technical assistance.
TOXICITY Results from independent toxicological lab tests:
LD 50 Dermal (rabits): 8.500 mg/Kg
LD 50 Oral (rats): 6.400 mg/Kg Dermal Irritant:
IPEL FG 891
MICROBIOLOGICAL ACTIVITY
It’s wide activity spectrum includes:
Fungi
Aspergillus sp Aureobasidium sp Alternaria sp Chaetomium sp Lentinus sp Penicillium sp Sclerophoma sp Trichoderma sp
SAFETY AND LABELLING
R - ; S- Phrases R 20, 21, 22, 36, 37, 38, 40, 43
S 20, 21, 24, 25, 36, 37, 39
Label Xi (Irritant), C (Corrosive)
Please check MSDS for any further information on safety and hazard advices.
ENVIROMMENTAL INFORMATION
The active ingredients of IPEL FG 891 are totally biodegradable when diluted under the CIM (Minimum Inhibitory Concentration) and will not cause any damage when sent diluted to waste treatment plants. In case of spillage, proceed as indicated at the MSDS and discard accordingly to the local regulations. All canisters and drums are made of recyclable HDPE
HANDLING AND STORAGE
Available in 20 kg, 50 kg, 200 kg drums and 1.000 kg containers. The canisters and drums are made of HDPE. Store the products on its original container at room temperature. Protect from frost, heat and direct sunlight. Best if consumed before complete 24 months from production date.
